NA 3000
Latex Additive for Mortar

BEST

A best-performance acrylic latex additive for mixing with NA 3100 Floor Set or NA 3120 Dual Set thin-set mortars. When mixed at 100% strength with these mortars (instead of water), NA 3000 increases flexibility, bond strength and freeze/thaw resistance.

A Portland-cement, thin-set mortar for installing floor tile.

A specially formulated, economical thin-set mortar for installing tile on floors and walls.

Single-component, thin-set mortar that is mixed only with water. This mortar is formulated with a unique dry polymer, resulting in good adhesion to substrates and tile.

A good-performance, polymer-modified thin-set mortar with increased bond strength for tile and stone installations.

A better-performance, polymer-modified thin-set mortar for setting tile and stone on a diverse range of indoor/outdoor substrates.

A best-performance, polymer-modified, rapid-set mortar ideal for setting small- to medium-sized tile that must be installed quickly.

A best-performing, polymer-modified “full-contact” mortar for large floor tile in a medium bed as well as smaller tile in thin-set floor applications.

A fast-setting, best-performing, polymer-modified “full-contact” mortar for setting large floor tile in a medium bed and smaller tile in traditional thin-set floor applications where fast job completion is imperative.

A best-performance, lightweight mortar that can be used for thin-to medium-bed and nonsag applications. Formulated for easy application, NA 3700 can be used in place of mastic for most installations. NA 3700 provides twice the coverage of standard thin-set mortars and has a neutral color appropriate for use with natural stone and light-colored grouts.

NA 3900
100%-Solids Epoxy Mortar

BEST

A two-part, 100%-solids, floor and wall epoxy setting mortar. For areas where superior chemical, impact and heavy traffic resistance is required. NA 3900 is a nonsag thin-set formula for wall applications of tile up to 12" x 12" x 3/8" (30 cm x 30 cm x 10 mm).