NA 200
Acrylic Primer For Self-Levelers

A solvent-free acrylic primer concentrate for North American Adhesives’ self-leveling underlayments and toppings.

NA 300
Epoxy Primer For Self-Leveling Underlayments

A solvent-free, water-based epoxy resin primer for enhanced adhesion to nonporous substrates before the application of tile-setting materials and underlayments.

NA 310
All-Purpose Primer for Self-Leveling Underlayments

A low-VOC, water-based acrylic primer that improves the performance and adhesion of self-leveling underlayments (SLUs) on nonabsorbent surfaces such as ceramic tile, vinyl composition tile (VCT) and adhesive residue, as well as profiled, absorbent surfaces.

NA 400
Self-Leveling Underlayment

GOOD

A cement-based, self-leveling underlayment that is mixed only with water to level and repair concrete floors from 1/8" to 1" (3 mm to 2,5 cm) in thickness.

NA 410
Reduced-Preparation Self-Leveling Underlayment

BETTER

A high-strength, self-leveling cement-based underlayment and repair mix for interior concrete and engineer-approved floors. NA 410 typically requires only a clean, soundly bonded substrate before application. NA 410 provides low installation costs and fast turnaround on jobsites.

empty

NA 440
Fast-Setting, Self-Leveling Underlayment

BEST

A cement-based self-leveling underlayment, for water mixing only, to level and repair concrete floors from 1/8" to 2" (3 mm to 5 cm) in thickness.

NA 440 is a specially formulated blend of calcium aluminate and Portland cements that offers compatible bonds with latex-modified cement mortars, resilient and ceramic tile adhesives, dry-set mortars, epoxies and polyurethane adhesives.

 
 
 

NA 500
Quick Patch

BETTER

A fast-setting, polymer-modified, cement-based patch.

NA 501
Latex Liquid Additive For NA 500 Quick Patch

BEST

An acrylic additive that extends the pot life of NA 500 fast-setting patch. When mixed with NA 500, it can be used as an embossing leveler and cover cutback adhesive residue.

NA 600
Self-Leveling and Wear-Surface Topping

BEST

A high-performance, light gray, fast-setting, cement-based self-leveling topping that is mixed only with water to level and repair concrete floors from 1/4" to 2" (6 mm to 5 cm) in thickness.

empty

NA 700
Fast-Drying Skimcoat

BETTER

A fast-drying, ultra smooth, polymer-modified, cement-based, skim-coating product.

empty

NA 840
Fast-Setting Repair Mix

BEST

A fast-setting, premixed, cement-based, ready-to-use mortar for concrete repairs and subfloor preparation work.

NA 1200
Shower Base and Floor Mortar

BEST

An economical blend of select sand and Portland cement.