North American Adhesives - Surface Preparation

NA 1200 Shower Base And Floor Mortar An economical blend of select sand and Portland cement. Mix with water to create a semi-dry underlayment mortar bed from 1/8" to 4" (3 mm to 10 cm) thick. Excellent for leveling rough or uneven concrete floors, and for building slopes on shower floors or other surfaces before installing ceramic tile or stone.

NA 200 Acrylic Primer For Self-Levelers A solvent-free acrylic primer concentrate for North American Adhesives' self-leveling underlayments and toppings.

NA 300 Epoxy Primer For Self-Leveling Underlayments A solvent-free, water-based epoxy resin primer for enhanced adhesion to nonporous substrates before the application of tile-setting materials and underlayments.

NA 310 All-Purpose Prmer For Self-Leveling Underlayment A low-VOC, water-based acrylic primer that improves the performance and adhesion of self-leveling underlayments (SLUs) on nonabsorbent surfaces such as ceramic tile, vinyl composition tile (VCT) and adhesive residue, as well as profiled, absorbent surfaces.

NA 400 Self-Leveling Underlayment A cement-based, self-leveling underlayment that is mixed only with water to level and repair concrete floors from 1/8" to 1" (3 mm to 2,5 cm) in thickness.

NA 500 Fast-Setting Patch A fast-setting, polymer-modified, cement-based patch.

NA 501 Latex Liquid Additive For NA 500 Fast-Setting Patch An acrylic additive that extends the pot life of NA 500 fast-setting patch. When mixed with NA 500, it can be used as an embossing leveler and cover cutback adhesive residue.

NA 600 Self-Leveling and Wear-Surface Topping A high-performance, light gray, fast-setting, cement-based self-leveling topping that is mixed only with water to level and repair concrete floors from 1/4" to 2" (6 mm to 5 cm) in thickness.

NA 700 Fast-Drying Skimcoat A fast-drying, ultra smooth, polymer-modified, cement-based, skim-coating product.

NA 840 Fast-Setting Repair Mix A fast-setting, premixed, cement-based, ready-to-use mortar for concrete repairs and subfloor preparation work.

NA 1200 Shower Base and Floor Mortar An economical blend of select sand and Portland cement. Mix with water to create a semi-dry underlayment mortar bed from 1/8" to 4" (3 mm to 10 cm) thick. Excellent for leveling rough or uneven concrete floors, and for building slopes on shower floors or other surfaces before installing ceramic tile or stone.

NA 2040
Premium Tile Adhesive

A premium-grade, premixed organic adhesive for setting all types of ceramic tile and non-moisture-sensitive stone (up to 6" x 6" [15 x 15 cm]) on indoor residential floors (light-duty traffic), countertops, ceilings and up to 12" x 12" (30 x 30 cm) on walls in areas that are dry or with intermittent wet conditions. NA 2040 also can be used for tub and bath surrounds and shower surrounds with precast shower bases.

NA 410 Reduced-Preparation Self-Leveling Underlayment A high-strength, self-leveling cement-based underlayment and repair mix for interior concrete and engineer-approved floors. NA 410 typically requires only a clean, soundly bonded substrate before application. NA 410 provides low installation costs and fast turnaround on jobsites.

NA 440
Fast-Setting, Self-Leveling Underlayment

A cement-based self-leveling underlayment, for water mixing only, to level and repair concrete floors from 1/8" to 2" (3 mm to 5 cm) in thickness.

NA 440 is a specially formulated blend of calcium aluminate and Portland cements that offers compatible bonds with latex-modified cement mortars, resilient and ceramic tile adhesives, dry-set mortars, epoxies and polyurethane adhesives.

NA 1550 Crack-Isolation & Sound Reduction Membrane A flexible, thin, lightweight, load-bearing, "self-adhered" membrane over which ceramic tile and natural stone can be installed immediately with any polymermodified cement mortar or epoxy mortar. Glue-down wood flooring also can be installed with any urethane adhesive.

NA 1510 Membrane Primer A water-based, acrylic membrane primer designed for priming properly prepared substrates before installing peel-and-stick membranes. Applied by roller or brush, a coat of NA 1510 is ready for NA 1550 after about 15 minutes of drying time.

NA 1740
Waterproofing & Crack-Isolation Membrane

A premixed, fast-drying, liquid-applied waterproofing and crack-isolation membrane for installation under ceramic tile or stone in residential, commercial and industrial environments. NA 1740 provides a thin, continuous barrier to protect adjacent rooms and floors below from water damage. NA 1740 can be applied with a roller or brush and is ready to receive tile or stone after 30 to 50 minutes of drying time.

NA 1750
Reinforcing Fabric

A ready-to-use, thin, flexible, lightweight, alkali-resistant, non-woven polyester fabric for optional embedment with NA 1740 waterproofing and crack-isolation membrane under ceramic tile or stone. NA 1750 quickly absorbs and bonds with NA 1740 to provide an additional level of durability, protection and insurance against water leaking through tile, stone or grout into adjacent rooms or floors below.

NA 1660
Waterproofing for Floors/Walls Behind Tile

Acts as a membrane barrier to prevent water that sometimes penetrates through tile or grout from migrating into adjacent walls, floors or rooms. NA 1660 waterproofing is premixed, ready-to-use and flexible. Once installed, it will prevent certain floor cracks from traveling into and damaging expensive tile or grout installations. NA 1660 can be applied by trowel, roller, or brush. NA 1660 is IAPMO-listed for use as a waterproofing shower pan liner, when used with NA 1680 waterproofing mesh.